*** MIDAS logfile (03SEPpl1.2) *** Th, 11 Aug 2005 13:46:13 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Th, 11 Aug 2005 13:46:29 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050811 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.92 stddev = 1.90 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050811 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1694.7 1694.6 819.0 0.10 0.00 2.07 2 1.54 3383.0 3382.5 1653.7 -0.01 -0.06 2.05 3 3.08 6759.4 6761.3 3301.9 -0.08 -0.06 2.05 4 4.62 10138.4 10139.9 4932.3 -0.06 -0.04 2.06 5 6.93 15196.6 15196.4 7558.0 -0.14 -0.13 2.01 6 9.23 20277.1 20274.2 10061.9 -0.06 -0.05 2.02 7 11.54 25358.0 25357.3 12901.4 -0.00 0.02 1.97 8 15.39 33818.2 33817.4 17290.8 0.01 0.03 1.96 9 19.23 42314.0 42311.2 20967.0 0.11 0.13 2.02 10 23.08 50785.3 50783.4 25451.1 0.13 0.15 2.00 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3369 to 100963 e- Average count rate measured: 2197 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.77 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.13 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay