*** MIDAS logfile (03SEPpl1.2) *** Sa, 06 Aug 2005 18:20:43 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Sa, 06 Aug 2005 18:20:58 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050806 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.71 stddev = 1.95 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050806 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1714.3 1712.8 849.2 0.06 0.03 2.02 2 1.54 3415.4 3415.2 1646.7 -0.08 -0.07 2.07 3 3.08 6826.2 6825.5 3336.6 -0.08 -0.07 2.05 4 4.62 10238.2 10237.7 4958.1 -0.04 -0.04 2.06 5 6.93 15337.2 15334.9 7584.2 -0.15 -0.15 2.02 6 9.23 20466.8 20464.0 10042.4 -0.06 -0.06 2.04 7 11.54 25601.5 25600.0 12781.6 0.03 0.03 2.00 8 15.39 34136.9 34136.6 17046.6 0.03 0.04 2.00 9 19.23 42709.9 42709.7 21400.8 0.13 0.14 2.00 10 23.08 51260.7 51262.5 24743.8 0.15 0.16 2.07 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3484 to 104229 e- Average count rate measured: 2218 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.03 +/- 0.02 e-/ADU RON = 3.97 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.000 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay