*** MIDAS logfile (03SEPpl1.2) *** We, 27 Jul 2005 14:00:57 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** We, 27 Jul 2005 14:01:13 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050727 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.22 stddev = 1.89 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050727 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1707.5 1707.8 836.4 0.01 0.03 2.04 2 1.54 3406.8 3405.4 1731.1 -0.05 -0.07 1.97 3 3.08 6806.5 6804.7 3381.5 -0.07 -0.08 2.01 4 4.62 10206.8 10207.4 5007.4 -0.05 -0.04 2.04 5 6.93 15290.1 15292.9 7668.5 -0.15 -0.14 1.99 6 9.23 20407.6 20406.1 10136.7 -0.05 -0.05 2.01 7 11.54 25522.7 25520.4 13120.0 0.02 0.02 1.95 8 15.39 34038.0 34034.6 16675.0 0.04 0.03 2.04 9 19.23 42578.3 42581.9 21672.8 0.12 0.13 1.96 10 23.08 51109.6 51112.3 25069.7 0.16 0.16 2.04 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3437 to 102864 e- Average count rate measured: 2211 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.01 +/- 0.02 e-/ADU RON = 3.80 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.000 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay