*** MIDAS logfile (03SEPpl1.2) *** We, 06 Jul 2005   16:35:25   Page 1
 
 
*** MIDAS logfile (vers. 03SEPpl1.2) *** We, 06 Jul 2005   16:35:42   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 050706 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 298.73 stddev =   1.89 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_050706 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1722.7    1721.9     816.9      0.05      0.11      2.11
        2      1.54    3433.4    3431.2    1619.3     -0.06     -0.06      2.12
        3      3.08    6859.8    6860.7    3366.0     -0.07     -0.05      2.04
        4      4.62   10284.7   10284.8    5101.9     -0.06     -0.06      2.02
        5      6.93   15414.2   15412.9    7651.3     -0.13     -0.15      2.01
        6      9.23   20565.1   20565.0   10085.1     -0.05     -0.07      2.04
        7     11.54   25724.5   25724.1   12906.1      0.03      0.01      1.99
        8     15.39   34298.1   34297.2   17195.4      0.03      0.01      1.99
        9     19.23   42914.4   42918.3   21808.2      0.13      0.12      1.97
       10     23.08   51497.1   51501.4   25622.8      0.13      0.13      2.01
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3421 to 102302 e-
      Average count rate measured: 2228 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.99 +/-   0.01 e-/ADU
 
      RON    =   3.75 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.001 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.13/-0.14 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay