*** MIDAS logfile (03SEPpl1.2) *** We, 29 Jun 2005 20:21:00 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** We, 29 Jun 2005 20:21:17 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050629 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.56 stddev = 1.89 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050629 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1729.5 1729.2 853.9 0.09 0.08 2.03 2 1.54 3450.4 3449.7 1639.0 -0.02 -0.04 2.11 3 3.08 6895.8 6893.9 3332.5 -0.06 -0.07 2.07 4 4.62 10340.9 10340.1 5036.0 -0.04 -0.04 2.05 5 6.93 15493.0 15493.3 7549.7 -0.16 -0.15 2.05 6 9.23 20675.8 20671.8 9917.8 -0.07 -0.07 2.08 7 11.54 25858.0 25859.7 13175.3 -0.00 0.01 1.96 8 15.39 34487.8 34489.4 17284.8 0.03 0.04 2.00 9 19.23 43136.4 43140.4 21318.8 0.09 0.11 2.02 10 23.08 51786.5 51780.7 25959.8 0.14 0.14 1.99 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3447 to 103210 e- Average count rate measured: 2241 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.77 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay