*** MIDAS logfile (03SEPpl1.2) *** Fr, 17 Jun 2005 13:47:13 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 17 Jun 2005 13:47:30 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050617 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.46 stddev = 1.90 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050617 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1727.7 1725.6 845.3 0.00 0.03 2.04 2 1.54 3449.4 3449.7 1652.3 0.01 0.05 2.09 3 3.08 6887.9 6887.1 3337.8 -0.10 -0.11 2.06 4 4.62 10336.7 10339.3 5097.4 -0.03 -0.02 2.03 5 6.93 15483.5 15484.9 7711.8 -0.16 -0.16 2.01 6 9.23 20664.9 20667.9 10381.1 -0.06 -0.06 1.99 7 11.54 25842.0 25846.4 12779.4 -0.01 -0.01 2.02 8 15.39 34480.5 34481.6 18013.3 0.06 0.04 1.91 9 19.23 43103.0 43103.8 22332.8 0.07 0.05 1.93 10 23.08 51786.5 51795.0 25434.7 0.20 0.19 2.04 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3411 to 102308 e- Average count rate measured: 2240 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.03 e-/ADU RON = 3.76 +/- 0.06 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.19/-0.16 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay