*** MIDAS logfile (03SEPpl1.2) *** Tu, 14 Jun 2005 07:38:09 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Tu, 14 Jun 2005 07:38:26 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050614 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.34 stddev = 1.92 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050614 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1722.2 1722.7 828.3 0.03 0.05 2.08 2 1.54 3436.3 3437.1 1658.8 -0.07 -0.05 2.07 3 3.08 6870.0 6869.2 3326.3 -0.06 -0.07 2.07 4 4.62 10302.7 10304.4 5114.3 -0.05 -0.05 2.01 5 6.93 15440.3 15439.9 7808.6 -0.13 -0.14 1.98 6 9.23 20600.6 20601.9 10149.9 -0.06 -0.06 2.03 7 11.54 25771.8 25770.1 12997.6 0.03 0.02 1.98 8 15.39 34363.1 34367.5 17373.5 0.03 0.04 1.98 9 19.23 42992.7 42991.1 21491.8 0.13 0.12 2.00 10 23.08 51597.8 51598.7 25703.3 0.14 0.14 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3436 to 102942 e- Average count rate measured: 2233 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.00 +/- 0.01 e-/ADU RON = 3.84 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay