*** MIDAS logfile (03SEPpl1.2) *** Fr, 03 Jun 2005   13:47:27   Page 1
 
 
*** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 03 Jun 2005   13:47:43   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 050603 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 299.94 stddev =   1.94 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_050603 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1746.9    1748.8     871.3      0.02      0.06      2.00
        2      1.54    3486.9    3486.3    1603.7      0.00     -0.02      2.17
        3      3.08    6960.3    6963.2    3281.6     -0.09     -0.07      2.12
        4      4.62   10440.0   10440.5    5379.6     -0.05     -0.06      1.94
        5      6.93   15641.1   15642.5    7752.0     -0.16     -0.16      2.02
        6      9.23   20873.1   20875.3   10538.0     -0.06     -0.07      1.98
        7     11.54   26112.2   26110.3   13043.0      0.03      0.01      2.00
        8     15.39   34818.2   34820.6   17112.5      0.04      0.03      2.03
        9     19.23   43555.8   43560.0   21780.7      0.12      0.12      2.00
       10     23.08   52286.4   52288.3   26653.0      0.16      0.15      1.96
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3456 to 103377 e-
      Average count rate measured: 2262 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.98 +/-   0.02 e-/ADU
 
      RON    =   3.83 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.000 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.16/-0.16 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay