*** MIDAS logfile (03SEPpl1.2) *** Su, 29 May 2005   16:48:08   Page 1
 
 
*** MIDAS logfile (vers. 03SEPpl1.2) *** Su, 29 May 2005   16:48:24   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 050529 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 300.10 stddev =   1.92 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_050529 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1753.1    1752.9     837.7      0.04      0.02      2.09
        2      1.54    3494.8    3496.8    1717.1     -0.09     -0.05      2.04
        3      3.08    6986.8    6984.4    3358.3     -0.06     -0.07      2.08
        4      4.62   10475.9   10473.0    5063.4     -0.04     -0.06      2.07
        5      6.93   15696.3   15697.3    7491.4     -0.13     -0.13      2.10
        6      9.23   20942.5   20941.1   10706.3     -0.06     -0.05      1.96
        7     11.54   26198.7   26197.0   12855.0      0.03      0.04      2.04
        8     15.39   34929.5   34927.5   17593.7      0.03      0.03      1.99
        9     19.23   43708.7   43703.3   22572.3      0.14      0.14      1.94
       10     23.08   52446.4   52439.5   26258.1      0.14      0.13      2.00
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3443 to 103016 e-
      Average count rate measured: 2269 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.96 +/-   0.02 e-/ADU
 
      RON    =   3.77 +/-   0.04 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.000 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.14/-0.13 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay