*** MIDAS logfile (03SEPpl1.2) *** Su, 22 May 2005   16:55:52   Page 1
 
 
*** MIDAS logfile (vers. 03SEPpl1.2) *** Su, 22 May 2005   16:56:08   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 050522 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 300.57 stddev =   1.95 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_050522 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1758.9    1759.3     846.5      0.08      0.10      2.08
        2      1.54    3508.1    3508.0    1719.1     -0.06     -0.07      2.04
        3      3.08    7011.6    7012.2    3350.4     -0.07     -0.06      2.09
        4      4.62   10516.4   10517.9    5176.7     -0.05     -0.04      2.03
        5      6.93   15760.4   15757.1    7741.1     -0.13     -0.15      2.04
        6      9.23   21026.8   21027.2   10643.3     -0.07     -0.06      1.98
        7     11.54   26302.2   26302.6   13247.7      0.02      0.02      1.99
        8     15.39   35072.5   35071.1   17868.1      0.03      0.02      1.96
        9     19.23   43879.4   43878.8   22044.6      0.12      0.12      1.99
       10     23.08   52660.8   52654.0   26021.6      0.13      0.12      2.02
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3511 to 105090 e-
      Average count rate measured: 2279 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.00 +/-   0.01 e-/ADU
 
      RON    =   3.89 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.001 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.13/-0.14 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay