*** MIDAS logfile (03SEPpl1.2) *** Su, 15 May 2005   14:05:57   Page 1
 
 
*** MIDAS logfile (vers. 03SEPpl1.2) *** Su, 15 May 2005   14:06:13   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 050515 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 300.16 stddev =   1.94 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_050515 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1748.5    1748.8     839.6      0.00      0.01      2.08
        2      1.54    3492.3    3493.1    1707.3      0.01      0.03      2.05
        3      3.08    6972.6    6972.2    3353.7     -0.10     -0.11      2.08
        4      4.62   10464.0   10465.0    5178.1     -0.02     -0.02      2.02
        5      6.93   15673.6   15674.6    7744.9     -0.15     -0.15      2.02
        6      9.23   20913.8   20918.3   10483.5     -0.07     -0.06      1.99
        7     11.54   26154.2   26153.8   13251.9     -0.01     -0.02      1.97
        8     15.39   34903.8   34907.2   17532.8      0.08      0.07      1.99
        9     19.23   43609.4   43619.0   21936.4      0.03      0.04      1.99
       10     23.08   52426.2   52432.9   25834.6      0.22      0.22      2.03
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3504 to 105054 e-
      Average count rate measured: 2267 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.00 +/-   0.01 e-/ADU
 
      RON    =   3.89 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.001 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.22/-0.15 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay