*** MIDAS logfile (03SEPpl1.2) *** Su, 24 Apr 2005   16:53:21   Page 1
 
 
*** MIDAS logfile (vers. 03SEPpl1.2) *** Su, 24 Apr 2005   16:53:37   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 050424 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 299.99 stddev =   1.98 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_050424 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1759.8    1760.0     846.6      0.05      0.06      2.08
        2      1.54    3513.5    3513.7    1711.4      0.01      0.00      2.05
        3      3.08    7016.1    7019.1    3514.7     -0.11     -0.08      2.00
        4      4.62   10529.2   10528.2    5192.1     -0.03     -0.04      2.03
        5      6.93   15773.5   15774.9    7757.9     -0.14     -0.15      2.03
        6      9.23   21046.9   21048.9   10371.0     -0.06     -0.06      2.03
        7     11.54   26320.4   26322.7   12853.6     -0.01     -0.01      2.05
        8     15.39   35114.9   35116.0   18510.3      0.05      0.04      1.90
        9     19.23   43896.4   43903.1   21668.3      0.06      0.06      2.03
       10     23.08   52737.5   52743.1   26599.0      0.18      0.18      1.98
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3481 to 104326 e-
      Average count rate measured: 2281 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.98 +/-   0.03 e-/ADU
 
      RON    =   3.91 +/-   0.05 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.001 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.18/-0.15 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay