*** MIDAS logfile (03SEPpl1.2) *** Sa, 16 Apr 2005 16:10:42 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Sa, 16 Apr 2005 16:10:58 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050416 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.61 stddev = 1.93 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050416 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1743.2 1742.3 820.6 0.05 0.01 2.12 2 1.54 3477.8 3477.5 1631.5 -0.05 -0.06 2.13 3 3.08 6953.4 6953.0 3422.9 -0.06 -0.06 2.03 4 4.62 10427.7 10425.9 5169.5 -0.04 -0.04 2.02 5 6.93 15624.4 15623.5 7760.4 -0.13 -0.14 2.01 6 9.23 20843.4 20846.5 10485.9 -0.08 -0.06 1.99 7 11.54 26076.0 26076.3 13374.4 0.02 0.03 1.95 8 15.39 34772.7 34774.7 17337.4 0.03 0.04 2.01 9 19.23 43500.3 43502.3 21798.8 0.11 0.12 2.00 10 23.08 52218.4 52218.2 25340.8 0.15 0.16 2.06 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3530 to 105776 e- Average count rate measured: 2259 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.03 +/- 0.02 e-/ADU RON = 3.91 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay