*** MIDAS logfile (03SEPpl1.2) *** Su, 10 Apr 2005 19:46:17 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Su, 10 Apr 2005 19:46:32 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050410 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.86 stddev = 1.92 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050410 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1750.2 1750.2 831.1 0.02 0.00 2.11 2 1.54 3495.8 3494.1 1675.1 0.00 -0.02 2.09 3 3.08 6982.3 6982.3 3464.1 -0.08 -0.08 2.02 4 4.62 10473.2 10473.6 5032.3 -0.04 -0.04 2.08 5 6.93 15691.4 15693.2 7763.2 -0.15 -0.13 2.02 6 9.23 20939.5 20939.5 10505.9 -0.06 -0.06 1.99 7 11.54 26189.3 26188.8 13044.7 0.01 0.01 2.01 8 15.39 34928.1 34930.2 17427.4 0.04 0.05 2.00 9 19.23 43682.6 43683.7 21543.7 0.09 0.10 2.03 10 23.08 52452.2 52453.7 25733.7 0.16 0.16 2.04 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3545 to 106236 e- Average count rate measured: 2269 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.03 +/- 0.01 e-/ADU RON = 3.88 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay