*** MIDAS logfile (03SEPpl1.2) *** Sa, 09 Apr 2005 17:31:38 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Sa, 09 Apr 2005 17:31:53 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050409 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.71 stddev = 1.95 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050409 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1750.7 1752.5 850.9 0.01 0.06 2.06 2 1.54 3496.1 3493.9 1668.4 -0.03 -0.07 2.10 3 3.08 6984.1 6985.6 3424.7 -0.07 -0.06 2.04 4 4.62 10476.6 10474.5 5179.2 -0.04 -0.05 2.02 5 6.93 15696.1 15698.1 7724.4 -0.14 -0.13 2.03 6 9.23 20945.7 20946.3 10365.2 -0.06 -0.05 2.02 7 11.54 26201.7 26200.4 13095.5 0.03 0.03 2.00 8 15.39 34938.6 34934.3 17525.4 0.04 0.03 1.99 9 19.23 43704.3 43703.6 22124.3 0.11 0.12 1.98 10 23.08 52456.7 52454.9 26254.0 0.14 0.14 2.00 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3473 to 104003 e- Average count rate measured: 2270 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.01 e-/ADU RON = 3.86 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay