*** MIDAS logfile (03SEPpl1.2) *** Su, 13 Mar 2005 14:57:05 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Su, 13 Mar 2005 14:57:22 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050313 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.72 stddev = 1.91 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050313 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1773.0 1772.9 859.8 0.05 0.04 2.06 2 1.54 3539.2 3536.5 1697.3 -0.03 -0.06 2.09 3 3.08 7069.7 7069.8 3408.5 -0.07 -0.07 2.07 4 4.62 10602.5 10603.3 5182.2 -0.05 -0.05 2.05 5 6.93 15887.6 15887.8 7882.3 -0.15 -0.14 2.02 6 9.23 21198.9 21200.3 10583.9 -0.07 -0.05 2.00 7 11.54 26518.9 26517.1 13237.8 0.02 0.02 2.00 8 15.39 35363.5 35364.1 17763.9 0.03 0.04 1.99 9 19.23 44239.1 44240.0 23171.7 0.12 0.12 1.91 10 23.08 53102.0 53102.4 26513.2 0.15 0.15 2.00 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3475 to 104068 e- Average count rate measured: 2297 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.96 +/- 0.02 e-/ADU RON = 3.75 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay