*** MIDAS logfile (03SEPpl1.2) *** Su, 06 Mar 2005 14:37:09 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Su, 06 Mar 2005 14:37:25 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050306 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.92 stddev = 1.92 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050306 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1824.8 1825.2 879.5 0.03 0.06 2.07 2 1.54 3642.8 3642.5 1718.1 0.00 -0.01 2.12 3 3.08 7279.8 7277.9 3517.2 -0.06 -0.08 2.07 4 4.62 10917.9 10918.6 5455.3 -0.03 -0.02 2.00 5 6.93 16355.0 16354.9 8199.8 -0.15 -0.15 1.99 6 9.23 21824.3 21822.2 10999.9 -0.07 -0.07 1.98 7 11.54 27298.6 27300.4 13560.6 0.01 0.02 2.01 8 15.39 36407.9 36408.6 18520.4 0.04 0.04 1.97 9 19.23 45533.5 45529.3 23081.0 0.09 0.08 1.97 10 23.08 54665.3 54666.0 27308.0 0.14 0.14 2.00 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3614 to 108256 e- Average count rate measured: 2365 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.01 e-/ADU RON = 3.81 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay