*** MIDAS logfile (03SEPpl1.2) *** Fr, 04 Mar 2005 15:23:30 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 04 Mar 2005 15:23:46 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050304 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.59 stddev = 1.94 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050304 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1811.0 1810.8 856.0 -0.01 0.08 2.12 2 1.54 3614.4 3614.2 1746.8 -0.02 0.00 2.07 3 3.08 7218.4 7219.1 3485.9 -0.09 -0.08 2.07 4 4.62 10828.7 10829.9 5371.6 -0.04 -0.04 2.02 5 6.93 16222.8 16227.3 8198.2 -0.15 -0.15 1.98 6 9.23 21652.8 21651.9 10669.4 -0.04 -0.07 2.03 7 11.54 27079.5 27080.8 13455.0 0.02 0.00 2.01 8 15.39 36118.8 36117.5 19719.4 0.06 0.03 1.83 9 19.23 45164.8 45162.7 22464.0 0.10 0.07 2.01 10 23.08 54227.7 54229.4 27197.0 0.16 0.14 1.99 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3557 to 106528 e- Average count rate measured: 2346 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.96 +/- 0.04 e-/ADU RON = 3.81 +/- 0.08 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay