*** MIDAS logfile (03SEPpl1.2) *** Mo, 28 Feb 2005 15:01:23 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Mo, 28 Feb 2005 15:01:38 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 050228 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.04 stddev = 1.90 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_050228 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1638.5 1638.6 749.8 0.08 0.08 2.19 2 1.54 3274.5 3273.0 1533.2 -0.01 -0.01 2.14 3 3.08 6544.0 6545.4 3146.0 -0.07 -0.06 2.08 4 4.62 9817.0 9815.0 4715.2 -0.05 -0.07 2.08 5 6.93 14709.1 14708.7 7236.8 -0.16 -0.16 2.03 6 9.23 19632.9 19631.5 9694.6 -0.06 -0.06 2.03 7 11.54 24552.7 24555.6 12431.2 -0.01 0.01 1.98 8 15.39 32750.1 32750.0 16221.1 0.03 0.03 2.02 9 19.23 40966.9 40965.6 20644.0 0.10 0.10 1.98 10 23.08 49186.1 49184.8 24478.4 0.15 0.15 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3260 to 97856 e- Average count rate measured: 2128 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.77 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.16 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay