*** MIDAS logfile (03SEPpl1.2) *** Sa, 12 Feb 2005 16:01:13 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Sa, 12 Feb 2005 16:01:28 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 050212 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.19 stddev = 1.91 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_050212 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1635.6 1637.2 758.3 0.09 0.01 2.16 2 1.54 3267.4 3269.4 1580.9 -0.02 -0.03 2.07 3 3.08 6531.2 6533.0 3128.7 -0.09 -0.08 2.09 4 4.62 9801.4 9802.0 4812.3 -0.03 -0.03 2.04 5 6.93 14686.2 14683.6 7092.7 -0.15 -0.16 2.07 6 9.23 19598.1 19596.3 9924.9 -0.07 -0.07 1.97 7 11.54 24509.6 24513.2 12109.1 -0.01 0.01 2.02 8 15.39 32694.4 32696.9 16793.0 0.03 0.05 1.95 9 19.23 40889.4 40895.5 19989.0 0.08 0.11 2.05 10 23.08 49104.8 49103.3 24580.0 0.16 0.17 2.00 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3266 to 98009 e- Average count rate measured: 2124 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.00 +/- 0.02 e-/ADU RON = 3.81 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.17/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay