*** MIDAS logfile (03SEPpl1.2) *** Mo, 10 Jan 2005 13:11:05 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Mo, 10 Jan 2005 13:11:20 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 050110 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.44 stddev = 1.90 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_050110 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1661.8 1660.6 765.6 0.06 0.04 2.17 2 1.54 3318.5 3316.5 1565.3 0.00 -0.03 2.12 3 3.08 6629.6 6628.4 3215.7 -0.09 -0.09 2.06 4 4.62 9948.5 9945.1 4889.5 -0.02 -0.05 2.03 5 6.93 14900.0 14903.5 7026.4 -0.17 -0.15 2.12 6 9.23 19887.4 19889.0 9710.0 -0.07 -0.05 2.05 7 11.54 24870.3 24873.7 12228.7 -0.01 0.01 2.03 8 15.39 33182.2 33180.3 16657.7 0.05 0.05 1.99 9 19.23 41486.7 41492.5 20887.2 0.08 0.09 1.99 10 23.08 49828.8 49828.8 24990.9 0.17 0.17 1.99 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3288 to 98630 e- Average count rate measured: 2155 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.01 e-/ADU RON = 3.76 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.17/-0.16 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay