*** MIDAS logfile (03SEPpl1.2) *** Su, 26 Dec 2004   16:39:51   Page 1
 
 
*** MIDAS logfile (vers. 03SEPpl1.2) *** Su, 26 Dec 2004   16:40:07   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#46 TAKEN ON 041226 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 297.95 stddev =   1.88 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_46_041226 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1667.2    1667.0     793.2      0.06      0.06      2.10
        2      1.54    3329.3    3329.5    1581.9     -0.05     -0.04      2.10
        3      3.08    6654.9    6654.7    3182.4     -0.06     -0.07      2.09
        4      4.62    9981.1    9982.1    4786.5     -0.06     -0.05      2.09
        5      6.93   14960.5   14957.6    7205.1     -0.13     -0.14      2.08
        6      9.23   19958.0   19957.1    9860.0     -0.07     -0.07      2.02
        7     11.54   24968.7   24966.7   12630.9      0.02      0.02      1.98
        8     15.39   33293.3   33292.8   16348.9      0.02      0.02      2.04
        9     19.23   41663.0   41657.1   20753.4      0.14      0.13      2.01
       10     23.08   49995.4   49994.7   25292.2      0.14      0.14      1.98
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3302 to 99036 e-
      Average count rate measured: 2163 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.98 +/-   0.01 e-/ADU
 
      RON    =   3.72 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.002 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.14/-0.14 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay