*** MIDAS logfile (03SEPpl1.2) *** Su, 19 Dec 2004 12:34:14 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Su, 19 Dec 2004 12:34:30 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 041219 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.74 stddev = 1.92 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_041219 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1675.3 1673.8 782.8 0.09 0.01 2.14 2 1.54 3341.7 3343.6 1606.7 -0.09 -0.04 2.08 3 3.08 6685.0 6684.7 3180.9 -0.05 -0.05 2.10 4 4.62 10023.8 10024.6 4780.7 -0.07 -0.06 2.10 5 6.93 15023.7 15024.3 7553.3 -0.14 -0.13 1.99 6 9.23 20044.7 20045.7 9966.6 -0.07 -0.06 2.01 7 11.54 25083.9 25081.6 12328.4 0.04 0.04 2.03 8 15.39 33435.4 33434.4 16641.2 0.01 0.02 2.01 9 19.23 41859.5 41854.3 20857.9 0.17 0.17 2.01 10 23.08 50199.5 50193.4 24611.6 0.11 0.11 2.04 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3379 to 101283 e- Average count rate measured: 2173 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.02 +/- 0.01 e-/ADU RON = 3.87 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.17/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay