*** MIDAS logfile (03SEPpl1.2) *** We, 08 Dec 2004 19:16:04 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** We, 08 Dec 2004 19:16:20 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 041208 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 296.93 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_041208 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1677.5 1675.5 772.4 0.08 0.01 2.17 2 1.54 3346.8 3345.9 1594.4 -0.05 -0.06 2.10 3 3.08 6688.1 6688.6 3234.7 -0.12 -0.10 2.07 4 4.62 10037.6 10036.1 4826.3 -0.04 -0.04 2.08 5 6.93 15040.3 15040.8 7411.4 -0.14 -0.14 2.03 6 9.23 20070.6 20069.6 10037.8 -0.06 -0.05 2.00 7 11.54 25104.4 25103.3 12852.9 0.01 0.02 1.95 8 15.39 33486.0 33487.9 17021.7 0.05 0.06 1.97 9 19.23 41874.4 41875.8 20862.5 0.09 0.11 2.01 10 23.08 50294.3 50291.4 24776.5 0.18 0.19 2.03 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3355 to 100651 e- Average count rate measured: 2175 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.00 +/- 0.02 e-/ADU RON = 3.73 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.19/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay