*** MIDAS logfile (03SEPpl1.2) *** Fr, 05 Nov 2004 12:33:48 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 05 Nov 2004 12:34:03 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 041105 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.77 stddev = 1.88 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_041105 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1663.1 1665.3 780.4 0.02 0.09 2.13 2 1.54 3322.9 3322.7 1565.8 -0.03 -0.04 2.12 3 3.08 6639.7 6640.4 3182.0 -0.08 -0.09 2.09 4 4.62 9958.9 9960.9 4865.2 -0.06 -0.06 2.05 5 6.93 14923.7 14926.1 7126.4 -0.16 -0.15 2.09 6 9.23 19918.1 19917.1 10027.4 -0.06 -0.07 1.99 7 11.54 24916.3 24915.2 12275.7 0.03 0.01 2.03 8 15.39 33229.7 33228.7 16209.1 0.05 0.04 2.05 9 19.23 41568.1 41566.4 20867.7 0.12 0.11 1.99 10 23.08 49899.8 49900.0 24440.9 0.16 0.15 2.04 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3359 to 100729 e- Average count rate measured: 2159 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.02 +/- 0.02 e-/ADU RON = 3.80 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay