*** MIDAS logfile (03SEPpl1.2) *** Tu, 26 Oct 2004 14:19:41 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Tu, 26 Oct 2004 14:19:57 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 041026 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.90 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_041026 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1644.2 1644.5 753.9 0.11 0.02 2.18 2 1.54 3283.3 3283.9 1559.4 -0.03 -0.06 2.11 3 3.08 6566.9 6565.8 3087.9 -0.07 -0.07 2.13 4 4.62 9848.8 9849.5 4722.1 -0.06 -0.04 2.09 5 6.93 14759.7 14761.2 7409.7 -0.16 -0.14 1.99 6 9.23 19697.8 19695.4 9911.7 -0.07 -0.06 1.99 7 11.54 24638.0 24638.1 12519.5 0.00 0.02 1.97 8 15.39 32861.4 32862.1 16464.2 0.03 0.05 2.00 9 19.23 41100.4 41101.8 20543.5 0.09 0.11 2.00 10 23.08 49349.7 49347.9 24002.9 0.15 0.17 2.06 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3319 to 99605 e- Average count rate measured: 2135 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.02 +/- 0.02 e-/ADU RON = 3.78 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay