*** MIDAS logfile (03SEPpl1.2) *** Fr, 24 Sep 2004 16:50:57 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 24 Sep 2004 16:51:12 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040924 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.70 stddev = 1.88 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040924 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1647.9 1646.9 780.8 0.12 0.08 2.11 2 1.54 3285.9 3285.4 1493.4 -0.08 -0.08 2.20 3 3.08 6568.9 6567.1 3177.1 -0.08 -0.09 2.07 4 4.62 9853.7 9850.9 4798.7 -0.06 -0.07 2.05 5 6.93 14767.0 14768.4 7053.1 -0.14 -0.12 2.09 6 9.23 19702.4 19703.8 9851.6 -0.07 -0.06 2.00 7 11.54 24649.9 24649.3 12231.0 0.02 0.03 2.02 8 15.39 32867.5 32865.3 16574.3 0.02 0.03 1.98 9 19.23 41128.5 41128.6 20350.8 0.13 0.15 2.02 10 23.08 49352.1 49346.1 24212.0 0.13 0.13 2.04 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3318 to 99390 e- Average count rate measured: 2135 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.01 +/- 0.01 e-/ADU RON = 3.78 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.13 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay