*** MIDAS logfile (03SEPpl1.2) *** Fr, 17 Sep 2004 14:31:07 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 17 Sep 2004 14:31:22 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040917 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.80 stddev = 1.89 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040917 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1661.0 1658.8 772.6 0.03 0.04 2.15 2 1.54 3314.5 3314.1 1558.4 -0.06 -0.04 2.13 3 3.08 6626.8 6626.5 3128.0 -0.08 -0.08 2.12 4 4.62 9940.9 9941.8 5004.0 -0.06 -0.05 1.99 5 6.93 14898.8 14900.0 7297.9 -0.14 -0.14 2.04 6 9.23 19880.5 19881.9 9859.3 -0.06 -0.06 2.02 7 11.54 24868.3 24867.9 12690.1 0.02 0.01 1.96 8 15.39 33167.8 33171.9 16375.1 0.05 0.05 2.03 9 19.23 41488.1 41492.0 21137.1 0.12 0.11 1.96 10 23.08 49810.1 49812.2 24493.6 0.17 0.16 2.03 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3318 to 99578 e- Average count rate measured: 2155 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.00 +/- 0.02 e-/ADU RON = 3.77 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.17/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay