*** MIDAS logfile (03SEPpl1.2) *** Mo, 23 Aug 2004 17:43:39 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Mo, 23 Aug 2004 17:43:54 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040823 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.49 stddev = 1.88 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040823 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1585.1 1585.4 724.9 0.10 0.02 2.19 2 1.54 3165.3 3166.4 1531.0 -0.04 -0.07 2.07 3 3.08 6331.4 6329.9 2990.9 -0.06 -0.07 2.12 4 4.62 9494.1 9496.3 4633.4 -0.07 -0.04 2.05 5 6.93 14231.2 14227.4 6873.4 -0.14 -0.15 2.07 6 9.23 18990.9 18986.6 9346.9 -0.07 -0.06 2.03 7 11.54 23754.0 23755.0 12069.0 0.01 0.03 1.97 8 15.39 31676.4 31674.3 15905.2 0.01 0.04 1.99 9 19.23 39637.0 39634.9 19809.2 0.12 0.15 2.00 10 23.08 47570.2 47566.0 23636.8 0.14 0.16 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3158 to 94776 e- Average count rate measured: 2058 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.74 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay