*** MIDAS logfile (03SEPpl1.2) *** Su, 08 Aug 2004 12:53:24 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Su, 08 Aug 2004 12:53:39 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040808 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.97 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040808 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1652.9 1652.8 769.5 0.04 0.03 2.15 2 1.54 3297.7 3298.2 1574.3 -0.07 -0.06 2.09 3 3.08 6593.0 6594.3 3149.2 -0.09 -0.08 2.09 4 4.62 9889.6 9890.9 4990.7 -0.06 -0.05 1.98 5 6.93 14822.2 14824.0 7377.7 -0.14 -0.13 2.01 6 9.23 19781.0 19781.5 9623.2 -0.05 -0.05 2.06 7 11.54 24739.8 24741.4 12651.1 0.02 0.02 1.96 8 15.39 32999.0 32999.0 16399.8 0.05 0.05 2.01 9 19.23 41274.7 41273.6 20459.1 0.12 0.11 2.02 10 23.08 49556.0 49557.2 24924.1 0.17 0.17 1.99 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3293 to 98726 e- Average count rate measured: 2144 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.74 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.17/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay