*** MIDAS logfile (03SEPpl1.2) *** Sa, 07 Aug 2004 20:29:15 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Sa, 07 Aug 2004 20:29:31 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040807 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.98 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040807 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1666.8 1666.2 762.6 0.03 0.10 2.19 2 1.54 3329.3 3326.3 1526.6 -0.04 -0.06 2.18 3 3.08 6652.8 6655.2 3176.0 -0.09 -0.05 2.09 4 4.62 9982.0 9978.1 4711.9 -0.05 -0.07 2.12 5 6.93 14958.2 14957.6 7293.9 -0.13 -0.14 2.05 6 9.23 19960.4 19961.0 9821.7 -0.06 -0.06 2.03 7 11.54 24968.1 24964.6 12460.0 0.02 0.01 2.00 8 15.39 33292.6 33290.5 16901.5 0.03 0.01 1.97 9 19.23 41657.7 41655.6 20751.2 0.13 0.12 2.01 10 23.08 49995.3 49993.4 24906.7 0.15 0.13 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3310 to 99284 e- Average count rate measured: 2163 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.69 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay