*** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 26 Jul 2004 19:36:56 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 26 Jul 2004 19:37:13 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040726 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.41 stddev = 1.96 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040726 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1655.8 1655.2 760.7 0.08 0.05 2.18 2 1.54 3302.7 3301.4 1548.3 -0.07 -0.09 2.13 3 3.08 6604.5 6603.3 3094.9 -0.07 -0.07 2.13 4 4.62 9903.6 9905.5 4843.0 -0.06 -0.05 2.04 5 6.93 14844.6 14844.5 7428.3 -0.14 -0.14 2.00 6 9.23 19805.7 19806.9 9954.5 -0.07 -0.06 1.99 7 11.54 24779.4 24777.9 12183.3 0.03 0.03 2.03 8 15.39 33039.3 33038.6 16873.1 0.03 0.03 1.96 9 19.23 41347.5 41343.4 20923.7 0.15 0.14 1.98 10 23.08 49608.3 49608.4 24618.3 0.13 0.14 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3283 to 98383 e- Average count rate measured: 2147 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.02 e-/ADU RON = 3.89 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay