*** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 11 Jul 2004   18:33:35   Page 1
 
 
*** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 11 Jul 2004   18:33:53   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#46 TAKEN ON 040711 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 299.22 stddev =   1.88 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_46_040711 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1612.8    1612.9     732.9      0.07      0.07      2.20
        2      1.54    3221.7    3221.7    1515.0     -0.05     -0.04      2.13
        3      3.08    6442.7    6441.5    3004.4     -0.07     -0.09      2.14
        4      4.62    9666.5    9669.0    4719.6     -0.04     -0.02      2.05
        5      6.93   14482.5   14483.2    7179.3     -0.16     -0.16      2.02
        6      9.23   19327.8   19327.3    9789.2     -0.07     -0.08      1.97
        7     11.54   24177.8   24178.7   12249.3      0.01      0.01      1.97
        8     15.39   32251.2   32246.7   15786.2      0.05      0.04      2.04
        9     19.23   40339.0   40336.8   19785.0      0.11      0.11      2.04
       10     23.08   48431.1   48429.8   24755.6      0.16      0.16      1.96
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3194 to 95921 e-
      Average count rate measured: 2095 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.98 +/-   0.02 e-/ADU
 
      RON    =   3.71 +/-   0.04 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.003 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.16/-0.16 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay