*** MIDAS logfile (vers. 02SEPpl1.3) *** Sa, 03 Jul 2004 16:50:25 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Sa, 03 Jul 2004 16:50:43 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040703 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.45 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040703 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1688.6 1690.4 807.5 0.08 0.03 2.09 2 1.54 3373.8 3374.2 1574.1 0.00 -0.03 2.14 3 3.08 6744.5 6746.6 3241.8 -0.07 -0.07 2.08 4 4.62 10117.4 10117.1 4975.6 -0.05 -0.06 2.03 5 6.93 15163.9 15161.9 7425.6 -0.14 -0.15 2.04 6 9.23 20232.7 20231.7 9964.7 -0.08 -0.07 2.03 7 11.54 25308.8 25308.9 12914.5 0.01 0.02 1.96 8 15.39 33752.4 33751.4 16871.0 0.02 0.03 2.00 9 19.23 42221.1 42226.9 21347.6 0.10 0.12 1.98 10 23.08 50689.3 50691.9 25133.4 0.14 0.16 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3363 to 100888 e- Average count rate measured: 2193 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.73 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay