*** MIDAS logfile (vers. 02SEPpl1.3) *** Th, 17 Jun 2004 12:54:08 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Th, 17 Jun 2004 12:54:26 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040617 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.14 stddev = 1.89 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040617 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1621.9 1622.1 748.6 0.03 0.03 2.17 2 1.54 3240.9 3241.5 1563.0 -0.04 -0.03 2.07 3 3.08 6479.5 6479.7 3065.0 -0.09 -0.09 2.11 4 4.62 9725.2 9722.7 4810.5 -0.02 -0.04 2.02 5 6.93 14569.3 14570.4 7072.1 -0.15 -0.14 2.06 6 9.23 19440.8 19442.8 10061.6 -0.07 -0.07 1.93 7 11.54 24318.2 24319.3 11603.3 0.01 0.01 2.10 8 15.39 32441.4 32441.6 16189.9 0.05 0.05 2.00 9 19.23 40569.8 40574.2 19883.3 0.10 0.11 2.04 10 23.08 48722.2 48722.9 24579.6 0.18 0.18 1.98 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3240 to 97339 e- Average count rate measured: 2107 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.00 +/- 0.02 e-/ADU RON = 3.77 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.18/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay