*** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 07 Jun 2004 14:26:49 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 07 Jun 2004 14:27:05 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040607 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.99 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040607 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1617.6 1618.8 737.5 0.09 0.02 2.19 2 1.54 3229.1 3230.1 1572.0 -0.09 -0.10 2.05 3 3.08 6462.9 6464.4 3079.5 -0.05 -0.03 2.10 4 4.62 9693.0 9690.3 4651.9 -0.05 -0.06 2.08 5 6.93 14524.0 14526.7 7146.0 -0.15 -0.13 2.03 6 9.23 19383.6 19382.2 9452.0 -0.07 -0.06 2.05 7 11.54 24249.0 24249.0 12377.1 0.02 0.04 1.96 8 15.39 32333.4 32328.0 15997.2 0.02 0.02 2.02 9 19.23 40469.3 40462.9 20712.5 0.15 0.16 1.95 10 23.08 48549.8 48544.0 23981.0 0.13 0.14 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3216 to 96486 e- Average count rate measured: 2101 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.02 e-/ADU RON = 3.70 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay