*** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 31 May 2004 20:24:42 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 31 May 2004 20:24:59 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040531 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.57 stddev = 1.88 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040531 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1689.7 1689.7 973.4 0.02 0.02 1.74 2 1.54 3374.3 3373.7 1644.5 -0.05 -0.06 2.05 3 3.08 6747.0 6745.8 3139.8 -0.07 -0.07 2.15 4 4.62 10119.2 10119.4 4705.0 -0.05 -0.04 2.15 5 6.93 15167.0 15166.1 7480.0 -0.13 -0.13 2.03 6 9.23 20234.5 20236.0 10130.5 -0.06 -0.06 2.00 7 11.54 25315.2 25314.0 12298.3 0.03 0.03 2.06 8 15.39 33757.2 33754.7 17223.3 0.04 0.03 1.96 9 19.23 42232.8 42232.6 21204.8 0.13 0.13 1.99 10 23.08 50689.2 50687.7 25129.2 0.15 0.15 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3368 to 101033 e- Average count rate measured: 2193 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.02 e-/ADU RON = 3.74 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.13 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay