*** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 23 May 2004   22:08:32   Page 1
 
 
*** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 23 May 2004   22:08:49   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#46 TAKEN ON 040523 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 300.05 stddev =   1.97 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_46_040523 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1667.4    1666.2     775.8      0.12      0.10      2.15
        2      1.54    3326.7    3326.6    1605.3     -0.07     -0.07      2.07
        3      3.08    6654.2    6654.6    3210.1     -0.08     -0.07      2.07
        4      4.62    9984.3    9981.1    4910.2     -0.05     -0.07      2.03
        5      6.93   14959.4   14961.5    7369.8     -0.16     -0.15      2.03
        6      9.23   19961.8   19964.1   10164.5     -0.08     -0.07      1.96
        7     11.54   24978.2   24977.3   12382.5      0.03      0.02      2.02
        8     15.39   33305.3   33304.5   16189.4      0.02      0.02      2.06
        9     19.23   41680.7   41677.7   20768.3      0.14      0.14      2.01
       10     23.08   50010.4   50009.6   25205.6      0.13      0.13      1.98
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3325 to 99765 e-
      Average count rate measured: 2164 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.99 +/-   0.02 e-/ADU
 
      RON    =   3.93 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.003 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.14/-0.15 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay