*** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 17 May 2004 16:30:15 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 17 May 2004 16:30:32 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040517 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.95 stddev = 1.88 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040517 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1709.4 1708.0 790.0 0.04 0.06 2.16 2 1.54 3413.6 3411.7 1625.2 -0.06 -0.04 2.10 3 3.08 6823.6 6823.9 3297.1 -0.08 -0.06 2.07 4 4.62 10235.1 10234.7 5088.8 -0.05 -0.06 2.01 5 6.93 15339.0 15339.4 7760.5 -0.14 -0.15 1.98 6 9.23 20467.6 20468.0 10004.5 -0.07 -0.07 2.05 7 11.54 25607.8 25608.5 12466.6 0.04 0.03 2.05 8 15.39 34142.2 34145.3 17053.3 0.03 0.02 2.00 9 19.23 42728.4 42728.7 21306.7 0.15 0.13 2.01 10 23.08 51273.7 51272.3 25946.0 0.15 0.13 1.98 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3390 to 101719 e- Average count rate measured: 2219 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.01 e-/ADU RON = 3.72 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay