*** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 16 May 2004 13:56:05 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 16 May 2004 13:56:22 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040516 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.63 stddev = 1.97 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040516 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1713.3 1711.5 813.8 0.14 0.09 2.11 2 1.54 3412.5 3412.7 1586.7 -0.15 -0.14 2.15 3 3.08 6834.3 6832.2 3238.2 -0.03 -0.03 2.11 4 4.62 10243.7 10242.2 5018.1 -0.07 -0.06 2.04 5 6.93 15357.5 15353.8 7386.1 -0.12 -0.13 2.08 6 9.23 20486.4 20485.8 10203.8 -0.07 -0.06 2.01 7 11.54 25638.2 25635.9 12533.2 0.05 0.06 2.05 8 15.39 34163.5 34161.8 17275.2 -0.01 0.00 1.98 9 19.23 42788.6 42781.7 21509.2 0.19 0.19 1.99 10 23.08 51284.6 51278.2 25472.9 0.07 0.08 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3406 to 102010 e- Average count rate measured: 2220 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.92 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.19/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay