*** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 07 May 2004 16:53:23 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 07 May 2004 16:53:40 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040507 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.85 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040507 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1703.3 1705.2 803.8 0.11 0.06 2.12 2 1.54 3401.6 3400.1 1569.8 -0.06 -0.11 2.17 3 3.08 6804.5 6803.4 3206.4 -0.04 -0.06 2.12 4 4.62 10203.3 10200.0 4962.0 -0.06 -0.07 2.06 5 6.93 15289.1 15289.6 7646.5 -0.16 -0.14 2.00 6 9.23 20406.0 20404.1 10299.3 -0.07 -0.05 1.98 7 11.54 25527.6 25525.5 12631.6 0.02 0.04 2.02 8 15.39 34034.2 34032.4 16751.4 0.01 0.03 2.03 9 19.23 42594.2 42593.9 21212.3 0.13 0.16 2.01 10 23.08 51103.6 51097.4 25260.2 0.11 0.13 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3427 to 102759 e- Average count rate measured: 2212 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.01 +/- 0.01 e-/ADU RON = 3.74 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay