*** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 30 Apr 2004 15:07:40 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 30 Apr 2004 15:07:57 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040430 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.63 stddev = 1.94 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040430 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1745.3 1742.9 806.1 0.15 0.08 2.17 2 1.54 3474.4 3471.1 1654.1 -0.16 -0.20 2.10 3 3.08 6952.4 6953.4 3342.9 -0.04 -0.01 2.08 4 4.62 10421.0 10420.7 5105.8 -0.09 -0.06 2.04 5 6.93 15624.5 15619.9 7594.9 -0.12 -0.12 2.06 6 9.23 20842.2 20838.9 10295.2 -0.07 -0.05 2.02 7 11.54 26082.7 26082.7 13294.5 0.06 0.09 1.96 8 15.39 34747.6 34744.6 17414.4 -0.03 -0.01 2.00 9 19.23 43544.7 43535.3 21655.5 0.23 0.24 2.01 10 23.08 52155.8 52143.9 26005.5 0.05 0.05 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3477 to 103967 e- Average count rate measured: 2258 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.87 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.23/-0.18 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay