*** MIDAS logfile (vers. 02SEPpl1.3) *** Tu, 20 Apr 2004 16:26:17 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Tu, 20 Apr 2004 16:26:34 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040420 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.49 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040420 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1737.1 1737.4 803.9 0.10 0.02 2.16 2 1.54 3468.9 3469.1 1619.7 -0.04 -0.07 2.14 3 3.08 6937.2 6936.9 3330.9 -0.09 -0.08 2.08 4 4.62 10406.6 10406.1 5008.7 -0.05 -0.05 2.08 5 6.93 15595.1 15596.3 7273.8 -0.15 -0.13 2.14 6 9.23 20809.9 20809.8 10779.1 -0.07 -0.06 1.93 7 11.54 26034.3 26034.0 13030.8 0.01 0.03 2.00 8 15.39 34721.5 34718.1 17165.2 0.03 0.05 2.02 9 19.23 43436.2 43434.7 21523.8 0.12 0.14 2.02 10 23.08 52134.3 52137.4 26441.6 0.14 0.17 1.97 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3436 to 103123 e- Average count rate measured: 2256 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.02 e-/ADU RON = 3.67 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay