*** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 12 Apr 2004 15:58:40 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 12 Apr 2004 15:58:57 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040412 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.16 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040412 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1734.1 1734.2 842.8 0.11 0.01 2.06 2 1.54 3463.1 3465.5 1669.5 -0.03 -0.04 2.07 3 3.08 6924.9 6924.2 3384.5 -0.08 -0.10 2.05 4 4.62 10388.5 10389.0 5126.1 -0.06 -0.05 2.03 5 6.93 15570.4 15568.9 7525.6 -0.15 -0.14 2.07 6 9.23 20777.9 20777.4 10110.0 -0.07 -0.05 2.06 7 11.54 25986.5 25987.7 12872.1 -0.00 0.02 2.02 8 15.39 34664.9 34666.9 17933.2 0.04 0.06 1.93 9 19.23 43354.0 43355.1 22174.8 0.09 0.11 1.96 10 23.08 52056.5 52058.3 25873.3 0.15 0.18 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3421 to 102687 e- Average count rate measured: 2252 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.97 +/- 0.02 e-/ADU RON = 3.67 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.17/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay