*** MIDAS logfile (vers. 02SEPpl1.3) *** We, 07 Apr 2004 17:08:17 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** We, 07 Apr 2004 17:08:34 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040407 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.58 stddev = 1.93 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040407 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1737.2 1735.2 812.5 0.13 0.08 2.14 2 1.54 3459.8 3460.4 1612.2 -0.15 -0.12 2.15 3 3.08 6927.7 6925.6 3365.5 -0.04 -0.04 2.06 4 4.62 10382.6 10381.5 5014.9 -0.08 -0.08 2.07 5 6.93 15566.3 15565.8 7649.6 -0.14 -0.13 2.03 6 9.23 20768.2 20766.8 10264.8 -0.07 -0.06 2.02 7 11.54 25989.7 25988.8 12858.2 0.05 0.06 2.02 8 15.39 34635.7 34632.6 17169.4 0.00 0.01 2.02 9 19.23 43379.1 43371.4 21187.9 0.20 0.19 2.05 10 23.08 51996.2 51988.9 26505.5 0.09 0.09 1.96 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3448 to 103254 e- Average count rate measured: 2251 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.02 e-/ADU RON = 3.83 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.20/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay