*** MIDAS logfile (vers. 02SEPpl1.3) *** We, 31 Mar 2004 17:10:31 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** We, 31 Mar 2004 17:10:48 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040331 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.30 stddev = 1.96 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040331 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1708.3 1710.3 793.8 0.08 0.03 2.15 2 1.54 3412.4 3414.5 1607.4 -0.05 -0.06 2.12 3 3.08 6824.1 6824.9 3280.6 -0.08 -0.08 2.08 4 4.62 10240.5 10241.5 5095.2 -0.03 -0.03 2.01 5 6.93 15342.2 15344.1 7604.9 -0.15 -0.14 2.02 6 9.23 20475.7 20476.5 10044.7 -0.07 -0.05 2.04 7 11.54 25614.1 25612.0 12779.6 0.02 0.02 2.00 8 15.39 34158.4 34155.7 16862.3 0.03 0.04 2.03 9 19.23 42726.0 42724.2 21272.5 0.10 0.11 2.01 10 23.08 51291.9 51294.3 25752.3 0.14 0.16 1.99 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3408 to 102276 e- Average count rate measured: 2219 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.90 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay