*** MIDAS logfile (vers. 02SEPpl1.3) *** We, 24 Mar 2004 17:03:54 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** We, 24 Mar 2004 17:04:11 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040324 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.57 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040324 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1751.1 1750.2 831.1 0.03 0.03 2.11 2 1.54 3494.2 3494.2 1671.3 -0.06 -0.06 2.09 3 3.08 6985.7 6985.8 3321.2 -0.09 -0.09 2.10 4 4.62 10478.8 10482.4 5323.6 -0.06 -0.03 1.97 5 6.93 15707.3 15708.4 7642.6 -0.13 -0.13 2.06 6 9.23 20960.1 20958.0 10668.1 -0.05 -0.06 1.96 7 11.54 26219.2 26218.4 13154.1 0.03 0.03 1.99 8 15.39 34963.3 34962.8 17352.2 0.04 0.04 2.01 9 19.23 43736.5 43739.0 22376.6 0.12 0.12 1.95 10 23.08 52498.9 52497.5 26022.5 0.15 0.15 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3482 to 104411 e- Average count rate measured: 2271 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.02 e-/ADU RON = 3.71 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.13 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay