*** MIDAS logfile (vers. 02SEPpl1.3) *** Tu, 09 Mar 2004 12:42:34 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Tu, 09 Mar 2004 12:42:51 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040309 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.07 stddev = 1.93 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040309 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1738.6 1739.1 818.6 0.08 0.10 2.12 2 1.54 3469.1 3468.9 1657.9 -0.08 -0.07 2.09 3 3.08 6939.1 6937.2 3350.1 -0.06 -0.08 2.07 4 4.62 10405.8 10407.2 5003.2 -0.06 -0.05 2.08 5 6.93 15594.6 15597.0 7578.6 -0.15 -0.14 2.06 6 9.23 20810.7 20807.8 10276.2 -0.06 -0.07 2.03 7 11.54 26035.5 26035.3 13025.1 0.03 0.03 2.00 8 15.39 34713.8 34711.0 17480.7 0.03 0.02 1.99 9 19.23 43448.7 43444.3 22354.3 0.16 0.15 1.94 10 23.08 52115.4 52113.2 26042.5 0.12 0.12 2.00 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3420 to 102497 e- Average count rate measured: 2256 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.97 +/- 0.02 e-/ADU RON = 3.79 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay