*** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 01 Mar 2004 16:53:27 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 01 Mar 2004 16:53:44 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040301 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.92 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040301 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1767.8 1770.0 825.1 0.04 0.12 2.14 2 1.54 3528.8 3527.3 1701.2 -0.11 -0.11 2.07 3 3.08 7059.6 7058.6 3402.1 -0.05 -0.06 2.08 4 4.62 10574.9 10575.0 5240.9 -0.15 -0.15 2.02 5 6.93 15866.4 15855.6 7832.5 -0.12 -0.19 2.03 6 9.23 21150.9 21149.2 10595.9 -0.14 -0.15 2.00 7 11.54 26484.3 26487.3 13401.8 0.04 0.05 1.98 8 15.39 35284.8 35282.9 18132.3 -0.05 -0.05 1.95 9 19.23 44181.6 44181.4 23026.4 0.13 0.13 1.92 10 23.08 53165.3 53166.3 27070.1 0.41 0.41 1.96 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3419 to 102760 e- Average count rate measured: 2294 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.93 +/- 0.01 e-/ADU RON = 3.60 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.41/-0.17 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay