*** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 22 Feb 2004 20:45:33 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 22 Feb 2004 20:45:49 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040222 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.72 stddev = 1.88 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040222 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1773.5 1773.7 828.8 0.04 0.05 2.14 2 1.54 3541.0 3541.9 1688.0 -0.06 -0.03 2.10 3 3.08 7079.5 7079.5 3369.4 -0.08 -0.09 2.10 4 4.62 10620.7 10621.8 5188.2 -0.05 -0.04 2.05 5 6.93 15915.5 15915.0 7833.8 -0.15 -0.15 2.03 6 9.23 21240.9 21242.2 10594.4 -0.05 -0.05 2.00 7 11.54 26569.2 26569.4 13179.3 0.02 0.02 2.02 8 15.39 35435.0 35435.6 17370.9 0.05 0.04 2.04 9 19.23 44321.3 44321.0 21524.6 0.11 0.11 2.06 10 23.08 53209.6 53212.0 26379.5 0.16 0.16 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3596 to 107881 e- Average count rate measured: 2302 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.03 +/- 0.01 e-/ADU RON = 3.80 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay